Power Supply

Introduction The world of digitally controlled switchmode power supplies has always held a certain allure for me: the idea that you could sample things like output voltage and current, apply some DSP techniques, and then based on that output a gate drive signal in real time, giving you whatever response you want out of your buck/boost converter just seems so… insanely cool. That being said, a lot of times these require a good understanding of the control loop architecture and parameters of switchmode power supplies to be able to properly stabilize, which has proven to be quite the barrier to entry....

The good, and perhaps bad, thing about passions and hobbies is that the energy to zealously pursue them ebbs and flows as the days, weeks, months or even years go past. Just recently, I experienced a strangely strong desire to just go out there and design something again out of frusration over what we’re “learning” at university, so here we are. Preface: Why LCSC Because DigiKey/Farnell/RS wouldn’t give me free shipping until I spent tonnes of cash, and even then, the VAT here in the UK is just crazy… It’s times like this when I really, really miss being in Malaysia....

Background As I have only recently come to realize, inductor selection for boost converters is not a trivial matter at all. Every inductor I tried saturated way too early, causing progress for the SMPS Chronicles Boost Converter project to grind to a halt. After many frustrating afternoons, and several blown parts and melted breadboard holes, I had enough. Inspired by this video on the RF Man YouTube channel (really nice channel by the way), I decided to build a dedicated jig that would allow me to easily measure the saturation current of the any inductor that I was about to use....